您目前所在的位置:首页 - 期刊简介 - 详细页面

铁道科学与工程学报

JOURNAL OF RAILWAY SCIENCE AND ENGINEERING

Vol. 19    Special 3    December 2009

[PDF Download]    [Flash Online]

    

Microstructure and properties of Fe-based coatings on cutting pick surface formed by plasma jet surface metallurgy
CHEN Hao(陈 颢)1, 2, YANG Jian-gao(羊建高)2,LI Hui-qi(李惠琪)3

1. School of Materials and Chemical Engineering, Jiangxi University of Science and Technology,
Ganzhou 341000, China;
2. Engineering Research Center of High-efficiency Development and Application
Technology of Tungsten Resources of Ministry of Education, Ganzhou 341000, China;
3. School of Materials Science, Shandong University of Science and Technology, Qingdao 266510, China

Abstract:The Fe-based composite coatings were produced on the attrition spot of cutting pick by plasma jet surface metallurgy, and metallurgical bonding was obtained between coating and substrate. The results show that the microstructure, microhardness, wear resistance and erode resistance of the coating are all evaluated. The coating has apparent characteristics of rapid and layered crystallization from planar crystal-cell/dendritic transition zone on the interface, to equiaxed crystal on the midst, to spike crystal on the surface. The microhardness gradually increases from the bottom to the top of the coating. The composite coating has better wear resistance and erode resistance compared to steel substrate.

 

Key words: cutting pick; plasma jet surface metallurgy; microstructure; wear resistance; erode resistance

ISSN 1672-7029
CN 43-1423/U

主管:中华人民共和国教育部 主办:中南大学 中国铁道学会 承办:中南大学
湘ICP备09001153号 版权所有:《铁道科学与工程学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市韶山南路22号 邮编:410075
电 话:0731-82655133,82656174   传真:0731-82655133   电子邮箱:jrse@mail.csu.edu.cn