您目前所在的位置:首页 - 期刊简介 - 详细页面

铁道科学与工程学报

JOURNAL OF RAILWAY SCIENCE AND ENGINEERING

Vol. 17    Special 1    November 2007

[PDF Download]    [Flash Online]

    

Cup-drawing formation of steel sheet with nickel coating by
finite element method
Key Laboratory of Low Dimensional Materials and Application Technology, Ministry of Education,
Faculty of Material and Photoelectronic Physics, Xiangtan University, Xiangtan 411105, China

Abstract:The finite element method (FEM) simulation of deep-drawing of steel sheet with nickel coating based on the solid element and dynamic explicit method was reported. Penalty function method was used to treat the contact algorithm. The friction between the punch and coating sheet was based on a Coulomb formulation. The combination of coating and substrate was defined as tied with failure contact. The results of the simulation illustrate that the steel sheet and the nickel coating do not delaminate at the interface. The stress field of the nickel coating is more complicated than that of the steel substrate. Furthermore, it is found that the punch-nose radius is the most unsubstantial part for the intensity of the entire deep-drawing part and the thinnest part, it is a dangerous zone for the break. At this zone, the thickness thinning of the steel sheet and the nickel coating are up to 4.8% and 6.7%, respectively. Meanwhile, it is found that the curve of the variable blankholder force (VBHF) designed can improve the formability of sheet.

 

Key words: electrodeposited nickel coating; solid element; finite element method; variable blankholder force

ISSN 1672-7029
CN 43-1423/U

主管:中华人民共和国教育部 主办:中南大学 中国铁道学会 承办:中南大学
湘ICP备09001153号 版权所有:《铁道科学与工程学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市韶山南路22号 邮编:410075
电 话:0731-82655133,82656174   传真:0731-82655133   电子邮箱:jrse@mail.csu.edu.cn