您目前所在的位置:首页 - 期刊简介 - 详细页面

铁道科学与工程学报

JOURNAL OF RAILWAY SCIENCE AND ENGINEERING

Vol. 7    No. 1    March 1997

[PDF Download]    [Flash Online]

    

DEPENDENCE OF PREDICTION MODEL OF FORMING LIMIT STRAINS ON FORMING METHOD AND MECHANICAL PROPERTIES OF SHEET METALS
Zhou Weixian

Department of Aeronautical Manufacturing Engineering; Northwestern Polytechnical University; Xi′an 710072

Abstract:Taking into account the deformation characteristics of sheet metal forming under punch or fluid pressure by means of the states of tension compression strains or biaxial tension strains, the possibility of development of the tensile instable deformation to localized necking deformation was analysed using the principle of minimum strain energy. It was found that this is impossible when the sheet metals are deformed by means of fluid pressure in the biaxial tension mode, and possible in other deformation conditions, but the possibility of breaking before the localized necking occurs due to the insufficient deformation ability of materials should be noted. Therefore, the choice of either localized necking type model or breaking type model for predicting the forming limit strains must be determined in the light of actual conditions.

 

Key words: forming limit strains prediction model forming method mechanical properties

ISSN 1672-7029
CN 43-1423/U

主管:中华人民共和国教育部 主办:中南大学 中国铁道学会 承办:中南大学
湘ICP备09001153号 版权所有:《铁道科学与工程学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市韶山南路22号 邮编:410075
电 话:0731-82655133,82656174   传真:0731-82655133   电子邮箱:jrse@mail.csu.edu.cn