您目前所在的位置:首页 - 期刊简介 - 详细页面

铁道科学与工程学报

JOURNAL OF RAILWAY SCIENCE AND ENGINEERING

Vol. 17    Special 1    November 2007

[PDF Download]    [Flash Online]

    

Properties and forming process of prealloyed
powder metallurgy Ti-6Al-4V alloy
WANG Liang(王  亮)1, LANG Ze-bao(郎泽保)1, SHI Hong-pei(史鸿培) 1

Aerospace Research Institute of Material and Processing Technology, Beijing 100076, China

Abstract:The properties and forming process of prealloyed powder metallurgy (PM) Ti-6Al-4V alloy were researched for application of high performance of titanium parts. Hot isostatic press (HIP) technology and two kinds of powders were used in the prealloyed processing to get full density material. Tensile properties, impact toughness and fracture toughness of PM Ti-6Al-4V alloy were studied and discussed. The microstructures were examined with optical microscope and the morphologies of powders were observed by SEM. Forming processes were performed to fabricate PM titanium parts. The experiment results show that the prealloyed PM Ti-6Al-4V alloy has same good properties as wrought material and the complex shape PM parts can be near-net-shaped. Some of the parts have been commercially used. This indicates that the prealloyed process should have bright prospects in making high-performance, complex shape and low-cost titanium alloy parts.

 

Key words: titanium alloy; Ti-6Al-4V; powder metallurgy; hot isostatic pressing; microstructure; property; near-net-shape

ISSN 1672-7029
CN 43-1423/U

主管:中华人民共和国教育部 主办:中南大学 中国铁道学会 承办:中南大学
湘ICP备09001153号 版权所有:《铁道科学与工程学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市韶山南路22号 邮编:410075
电 话:0731-82655133,82656174   传真:0731-82655133   电子邮箱:jrse@mail.csu.edu.cn