您目前所在的位置:首页 - 期刊简介 - 详细页面

铁道科学与工程学报

JOURNAL OF RAILWAY SCIENCE AND ENGINEERING

第14卷    第2期    总第83期    2017年2月

[PDF全文下载]    [Flash在线阅读]

    

文章编号:1672-7029(2017)02-0221-06
动车组轮对压装仿真及参数影响分析
黄堃,商跃进,王红,郑伟

(兰州交通大学 机电工程学院,甘肃 兰州 730070)

摘 要: 为了探究装配过盈量,摩擦因数,形状公差,轮轴突悬组装以及注油槽对压装曲线及轮轴接触部位应力的影响规律,以某型动车组轮对为研究对象,用ABAQUS软件建立轴对称有限元模型,对轮对压装过程进行仿真。研究结果表明:配合过盈量以及摩擦因数是确保配合质量达标的关键;轮轴突悬组装、车轮注油槽对接触部位的应力分布有显著影响;选择恰当的轮轴形状误差组合有利于压装的合格。

 

关键字: 高速动车组;轮对压装;过盈配合;压装曲线

Simulation and parameter influence analysis of the process of wheelset press-fitting for high-speed EMUs
HUANG Kun, SHANG Yuejin, WANG Hong, ZHENG Wei

School of Mechatronic Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China

Abstract:In order to investigate the effect of interference, friction coefficient, shape error, protruding assembly, oiling groove on the press-fit curve and stress of contact position, an axisymmetric finite element model was established by ABAQUS to simulate the wheelset press-fitting process of a high-speed EMUs. The result shows that interference and friction coefficient is the key factor to ensure the assembly quality reach the standard; Besides, protruding assembly and oiling groove have significant influence on stress of contact position; appropriate shape error combination of wheel and axle is conducive to a correct press-fitting.

 

Key words: high-speed EMUs; wheelset press-fitting; interference fit; press-fit curve

ISSN 1672-7029
CN 43-1423/U

主管:中华人民共和国教育部 主办:中南大学 中国铁道学会 承办:中南大学
湘ICP备09001153号 版权所有:《铁道科学与工程学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市韶山南路22号 邮编:410075
电 话:0731-82655133,82656174   传真:0731-82655133   电子邮箱:jrse@mail.csu.edu.cn